Winter use anti-rust oil

Rust-proof oil a lot of more phyletic, almost all of the raw material cannot leave the antirust grease and base oil, oil in low temperature is likely to occur under the condition of coagulation, stratification, is cloudy, it is a very bad phenomenon, probably let rust preventive rust ingredients dispersed, is likely to rust resistance, solve these phenomena, heat is the only condition, the rust inhibitor soak in hot water at 50 degrees, time big spinning 20 minutes, then stir well, these phenomena can be solved, pay special attention to the place of some volatile combustible temperature should be lowered, risk free.

Anti-rust oil is suitable for the workpiece surface welding place, can decorate for welding of different color.

Mixer can provide sealing good, wear resistance of film.

Coating of moderate flexibility, also has certain hardness after drying.

Pieces of workpiece surface adhesion is very good.

This product contains no lead, fast drying speed.

This product can be used in: industrial machinery, vehicles, pipes with joint, container, furniture, garden equipment, etc Pieces when using the rust inhibitor will be solid and solvent mixture operation again. Before winter use anti-rust agent, must first the workpiece surface cleaning, degreasing, drying in order to get best effect.

Single spraying no matter how thick, are two spraying effect is better than completely dry (the first layer to the second spraying), the first layer Dry for about 5 minutes.

Special note:

In pieces please pour the rust inhibitor use spray 2-3 seconds, avoid nozzle clogging, affect the next use.

Pieces do not spray on with conductive circuits of electronic components (such as circuit board), in case of short circuit or open circuit.

In pieces to avoid equipment charged when using this product.

Pieces after the operation, need to stay solvent volatilization completely, this product can be packing, because the rust inhibitor in winter dry for a long time.

To sum up: rust inhibitor in general is a relatively stable material, is sensitive to low temperature has certain, winter use anti-rust agent, must pay attention to the control of temperature. And the drying time control.